Techniques

Cone Calorimeter Heat Release Rate Service


The Cone Calorimeter Heat Release Rate Service provides a reliable means of measuring the heat release rate.

The Heat Release Rate is the single most important property predicting fire hazard, since it governs both the rate of fire growth and its maximum intensity. The Cone Calorimeter represents an important advance in laboratory-scale fire testing of polymeric materials and composites.Cone Calorimeter Heat Release Rate ServiceThe Cone Calorimeter can simulate a range of fire intensities.

At a heat flux level of 25 KWm-2 the Cone can simulate an initial fire growth model

At a heat flux level of 50 KWm-2 the Cone can simulate a developed fire growth model

At a heat flux level of 75 KWm-2 the Cone can simulate a fully developed or “flashover” fire growth model

It has been shown to provide data which correlates well with those from full-scale fire tests. Although primarily designed to measure rates of heat release, most commercial Cone Calorimeter instruments are equipped to measure several other important fire parameters.

Key Cone Calorimeter Heat Release Rate Service parameters considered are:

  • Time to ignition
  • Peak rate of heat release
  • Average heat release rate
  • Fire performance index
  • Smoke parameter

Cone Calorimeter Heat Release Rate Service

Cone Calorimeter Heat Release Rate Service

Cone Calorimeter Heat Release Rate Service

The Cone Calorimeter can also provide data used to calculate MAHRE and FIGRA values.

Cone Calorimeter Heat Release Rate Service

The Cone data and associated ConeTools™ software can be used to help predict how samples may behave in the larger SBI (Single Burning Item, EN 13823) or Room Corner Tests.

The Cone Calorimeter is subject to the following standards:

  • ISO 5660-1
  • BS476 (part 15)
  • ASTM E1354
  • ASTM E1474

Sample dimensions: 100mm x 100mm x up to 50mm thick.

To discuss your potential requirements, call Alastair on 01727 871301.

To discuss how we could help you please contact Alastair Monk

+44 (0) 1727 871301

 alastair.monk@italabs.co.uk
ITRI Labs